Sign in or register

If you want to take part in the discussions, sign in or apply for membership below!

Sign In with Facebook Sign In with Google Sign In with OpenID

In this Discussion

Probox2 Air Plus dead??

edited February 23 in PROBOX2 Air Plus
Hi all
I think that I have a big issue with my probox2 air plus.
It would not start anymore!! just get the blue light in front, but nothing else, only black screen.
I have to say that it was working perfectly with the last official rom 7.12.
I tryed to flash it again with sd card and with usb burning tool, with the 2 official roms, 6.0.1, and 7.1.2, but ni success. With usb burning tool I get this error message:
[HUB2-3][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
I trayed to do it again an again but no success, so do you think that my box is dead?? Is there any solution to get it back again? Thanks a lot for helping...
Have a nice day all
Log file:
[18:12:30 604][HUB2-3][Inf]--0-7-0-16
[18:12:30 604][HUB2-3][Inf]--CheckFileRunState succeed
[18:12:30 604][HUB2-3][Inf]-- low_power
[18:12:30 609][HUB2-3][Inf]--Send command success
[18:12:30 613][HUB2-3][Inf]--Read command status success
[18:12:30 613][HUB2-3][Inf]-------------Download meson1.dtb-----------
[18:12:30 614][HUB2-3][Inf]--0-7-0-16
[18:12:30 614][HUB2-3][Inf]-- download mem dtb normal 141312
[18:12:30 615][HUB2-3][Inf]--Send download command success
[18:12:30 628][HUB2-3][Inf]--Read command status success
[18:12:30 647][HUB2-3][Inf]--Transfer complete
[18:12:30 647][HUB2-3][Inf]--Send download get_status command succeed
[18:12:30 651][HUB2-3][Inf]--get_status success
[18:12:31 151][HUB2-3][Inf]-------------ERASE FLASH-----------
[18:12:31 151][HUB2-3][Inf]--disk_initial 1
[18:12:31 151][HUB2-3][Inf]--Send command success
[18:12:32 315][HUB2-3][Err]--failed:[18:12:32 315][HUB2-3][Err]--Check command return failed
[18:12:32 405][HUB2-3][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
[18:12:32 405][HUB2-3][Inf]--Close device handle 0x000001a8

Comments

  • edited February 23
    [18:11:45 302][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&1fe5f675&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:11:45 302][Global][Inf]-------->[Port0]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port2]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port3]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port4]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port5]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port6]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port7]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port8]NoDeviceConnected
    [18:11:45 302][Global][Inf]-------->[Port9]NoDeviceConnected
    [18:11:45 303][Global][Inf]-------->[Port10]NoDeviceConnected
    [18:11:45 303][Global][Inf]-------->[Port11]NoDeviceConnected
    [18:11:45 303][Global][Inf]-------->[Port12]NoDeviceConnected
    [18:11:45 303][Global][Inf]--Scan USB host controller complete
    [18:11:45 303][Global][Inf]--Update data center with HubMap
    [18:11:45 303][Global][Inf]--Update hub2 device data
    [18:11:45 303][Global][Inf]--Update HUB2-1
    [18:11:45 303][HUB2-1][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-2
    [18:11:45 303][HUB2-2][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [18:11:45 303][HUB2-3][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-4
    [18:11:45 303][HUB2-4][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-5
    [18:11:45 303][HUB2-5][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-6
    [18:11:45 303][HUB2-6][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-7
    [18:11:45 303][HUB2-7][Inf]--Update device path
    [18:11:45 303][Global][Inf]--Update HUB2-8
    [18:11:45 303][HUB2-8][Inf]--Update device path
    [18:11:45 308][HUB2-3][Inf]--Device is connected
    [18:11:45 308][HUB2-3][Inf]--Close device handle 0x0000016c
    [18:11:45 358][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x0000016c
    [18:11:50 409][HUB2-3][Inf]--0-7-0-16
    [18:11:50 410][HUB2-3][Inf]--CheckFileRunState succeed
    [18:11:50 410][HUB2-3][Inf]-- low_power
    [18:11:50 415][HUB2-3][Inf]--Send command success
    [18:11:50 418][HUB2-3][Inf]--Read command status success
    [18:11:50 419][HUB2-3][Inf]-------------Download meson1.dtb-----------
    [18:11:50 420][HUB2-3][Inf]--0-7-0-16
    [18:11:50 420][HUB2-3][Inf]-- download mem dtb normal 141312
    [18:11:50 420][HUB2-3][Inf]--Send download command success
    [18:11:50 433][HUB2-3][Inf]--Read command status success
    [18:11:50 449][HUB2-3][Inf]--Transfer complete
    [18:11:50 450][HUB2-3][Inf]--Send download get_status command succeed
    [18:11:50 453][HUB2-3][Inf]--get_status success
    [18:11:50 953][HUB2-3][Inf]-------------ERASE FLASH-----------
    [18:11:50 953][HUB2-3][Inf]--disk_initial 1
    [18:11:50 953][HUB2-3][Inf]--Send command success
    [18:11:52 117][HUB2-3][Err]--failed:[18:11:52 117][HUB2-3][Err]--Check command return failed
    [18:11:52 201][HUB2-3][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
    [18:11:52 201][HUB2-3][Inf]--Close device handle 0x0000016c
    [18:12:14 794][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
    [18:12:14 794][Global][Inf]--Scan usb device
    [18:12:14 794][Global][Inf]--Aml scan WorldCup Device
    [18:12:14 797][Global][Inf]--Host: Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
    [18:12:14 797][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c26&subsys_f9201179&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:14 797][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&185fee1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:14 797][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&2b4c469e&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:14 800][Global][Inf]---------->[Port0]Other device
    [18:12:14 800][Global][Inf]---------->[Port1]NoDeviceConnected
    [18:12:14 800][Global][Inf]---------->[Port2]NoDeviceConnected
    [18:12:14 800][Global][Inf]---------->[Port3]NoDeviceConnected
    [18:12:14 804][Global][Inf]---------->[Port4]Other device
    [18:12:14 806][Global][Inf]---------->[Port5]Other device
    [18:12:14 806][Global][Inf]---------->[Port6]NoDeviceConnected
    [18:12:14 806][Global][Inf]---------->[Port7]NoDeviceConnected
    [18:12:14 806][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:14 807][Global][Inf]--Host: Contrôleur d'hôte extensible Intel(R) USB 3.0
    [18:12:14 807][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c31&subsys_f9201179&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:14 807][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&1fe5f675&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:14 807][Global][Inf]-------->[Port0]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port2]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port3]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port4]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port5]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port6]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port7]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port8]NoDeviceConnected
    [18:12:14 807][Global][Inf]-------->[Port9]NoDeviceConnected
    [18:12:14 808][Global][Inf]-------->[Port10]NoDeviceConnected
    [18:12:14 808][Global][Inf]-------->[Port11]NoDeviceConnected
    [18:12:14 808][Global][Inf]-------->[Port12]NoDeviceConnected
    [18:12:14 808][Global][Inf]--Scan USB host controller complete
    [18:12:14 808][Global][Inf]--Update data center with HubMap
    [18:12:14 808][Global][Inf]--Update hub2 device data
    [18:12:14 808][Global][Inf]--Update HUB2-1
    [18:12:14 808][HUB2-1][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-2
    [18:12:14 808][HUB2-2][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-3
    [18:12:14 808][HUB2-3][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-4
    [18:12:14 808][HUB2-4][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-5
    [18:12:14 808][HUB2-5][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-6
    [18:12:14 808][HUB2-6][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-7
    [18:12:14 808][HUB2-7][Inf]--Update device path
    [18:12:14 808][Global][Inf]--Update HUB2-8
    [18:12:14 808][HUB2-8][Inf]--Update device path
    [18:12:19 980][Global][Inf]--Catch DBT_DEVICEARRIVAL
    [18:12:19 980][Global][Inf]--Scan usb device
    [18:12:19 981][Global][Inf]--Aml scan WorldCup Device
    [18:12:19 986][Global][Inf]--Host: Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
    [18:12:19 986][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c26&subsys_f9201179&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:19 987][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&185fee1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:19 987][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&2b4c469e&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:20 005][Global][Inf]---------->[Port0]Other device
    [18:12:20 005][Global][Inf]---------->[Port1]NoDeviceConnected
    [18:12:20 013][Global][Inf]---------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [18:12:20 013][Global][Inf]---------->[Port3]NoDeviceConnected
    [18:12:20 017][Global][Inf]---------->[Port4]Other device
    [18:12:20 020][Global][Inf]---------->[Port5]Other device
    [18:12:20 020][Global][Inf]---------->[Port6]NoDeviceConnected
    [18:12:20 020][Global][Inf]---------->[Port7]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:20 020][Global][Inf]--Host: Contrôleur d'hôte extensible Intel(R) USB 3.0
    [18:12:20 020][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c31&subsys_f9201179&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:20 020][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&1fe5f675&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:20 020][Global][Inf]-------->[Port0]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port2]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port3]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port4]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port5]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port6]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port7]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port8]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port9]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port10]NoDeviceConnected
    [18:12:20 020][Global][Inf]-------->[Port11]NoDeviceConnected
    [18:12:20 021][Global][Inf]-------->[Port12]NoDeviceConnected
    [18:12:20 021][Global][Inf]--Scan USB host controller complete
    [18:12:20 021][Global][Inf]--Update data center with HubMap
    [18:12:20 021][Global][Inf]--Update hub2 device data
    [18:12:20 021][Global][Inf]--Update HUB2-1
    [18:12:20 021][HUB2-1][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-2
    [18:12:20 021][HUB2-2][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [18:12:20 021][HUB2-3][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-4
    [18:12:20 021][HUB2-4][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-5
    [18:12:20 021][HUB2-5][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-6
    [18:12:20 021][HUB2-6][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-7
    [18:12:20 021][HUB2-7][Inf]--Update device path
    [18:12:20 021][Global][Inf]--Update HUB2-8
    [18:12:20 021][HUB2-8][Inf]--Update device path
    [18:12:20 052][Global][Inf]--Burning thread HUB2-3 start
    [18:12:20 102][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000001a8
    [18:12:20 152][HUB2-3][Inf]--Connect path=Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26/P0/P0/P2
    [18:12:20 152][HUB2-3][Inf]--Start burning...
    [18:12:20 202][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
    [18:12:20 202][HUB2-3][Inf]--2-2-0-0
    [18:12:20 202][HUB2-3][Inf]-------------Download DDR.USB-----------
    [18:12:20 203][HUB2-3][Inf]--2-2-0-0
    [18:12:20 203][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
    [18:12:20 703][HUB2-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
    [18:12:21 203][HUB2-3][Inf]--Write initial succeed
    [18:12:21 203][HUB2-3][Inf]--Upload encrypt at 0xc8100228
    [18:12:21 203][HUB2-3][Inf]--ulValue = 0xadfc318c
    [18:12:21 203][HUB2-3][Inf]--Read encrypt value succeed
    [18:12:21 218][HUB2-3][Inf]--Transfer complete
    [18:12:21 219][HUB2-3][Inf]--Run at address 0xd9000000
    [18:12:21 219][HUB2-3][Inf]--RunInRam succeed
    [18:12:21 572][HUB2-3][Inf]--2-2-0-0
    [18:12:21 572][HUB2-3][Inf]--CheckFileRunState succeed
    [18:12:21 573][HUB2-3][Inf]--runResult:0x 0,paraMagic:0x7856efab
    [18:12:21 573][HUB2-3][Inf]--ddrCapacity:0x c00
    [18:12:21 573][HUB2-3][Inf]-------------Download UBOOT.USB-----------
    [18:12:21 573][HUB2-3][Inf]--2-2-0-0
    [18:12:21 573][HUB2-3][Inf]--ulValue = 0xadfc318c
    [18:12:21 573][HUB2-3][Inf]--Download DDR.USB buffer at 0xd9000000
    [18:12:21 584][HUB2-3][Inf]--Transfer complete
    [18:12:21 584][HUB2-3][Inf]--Download UBOOT.USB buffer at 0x0200c000
    [18:12:21 727][HUB2-3][Inf]--Transfer complete
    [18:12:21 731][HUB2-3][Inf]--DownCheckPara succeed
    [18:12:21 731][HUB2-3][Inf]--Run at address 0xd9000000
    [18:12:21 785][HUB2-3][Inf]--ReadCheckPara succeed
    [18:12:21 786][HUB2-3][Inf]--Download DDR.USB buffer at 0xd9000000
    [18:12:21 798][HUB2-3][Inf]--Transfer complete
    [18:12:21 799][HUB2-3][Inf]--DownRunPara succeed
    [18:12:21 799][HUB2-3][Inf]--Run at address 0xd9000000
    [18:12:23 356][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
    [18:12:23 356][Global][Inf]--Scan usb device
    [18:12:23 356][Global][Inf]--Aml scan WorldCup Device
    [18:12:23 358][Global][Inf]--Host: Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
    [18:12:23 359][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c26&subsys_f9201179&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:23 359][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&185fee1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:23 359][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&2b4c469e&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:23 362][Global][Inf]---------->[Port0]Other device
    [18:12:23 362][Global][Inf]---------->[Port1]NoDeviceConnected
    [18:12:23 362][Global][Inf]---------->[Port2]NoDeviceConnected
    [18:12:23 362][Global][Inf]---------->[Port3]NoDeviceConnected
    [18:12:23 366][Global][Inf]---------->[Port4]Other device
    [18:12:23 369][Global][Inf]---------->[Port5]Other device
    [18:12:23 369][Global][Inf]---------->[Port6]NoDeviceConnected
    [18:12:23 369][Global][Inf]---------->[Port7]NoDeviceConnected
    [18:12:23 369][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:23 370][Global][Inf]--Host: Contrôleur d'hôte extensible Intel(R) USB 3.0
    [18:12:23 370][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c31&subsys_f9201179&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:23 370][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&1fe5f675&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:23 370][Global][Inf]-------->[Port0]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port2]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port3]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port4]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port5]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port6]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port7]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port8]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port9]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port10]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port11]NoDeviceConnected
    [18:12:23 370][Global][Inf]-------->[Port12]NoDeviceConnected
    [18:12:23 370][Global][Inf]--Scan USB host controller complete
    [18:12:23 371][Global][Inf]--Update data center with HubMap
    [18:12:23 371][Global][Inf]--Update hub2 device data
    [18:12:23 371][Global][Inf]--Update HUB2-1
    [18:12:23 371][HUB2-1][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-2
    [18:12:23 371][HUB2-2][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-3
    [18:12:23 371][HUB2-3][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-4
    [18:12:23 371][HUB2-4][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-5
    [18:12:23 371][HUB2-5][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-6
    [18:12:23 371][HUB2-6][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-7
    [18:12:23 371][HUB2-7][Inf]--Update device path
    [18:12:23 371][Global][Inf]--Update HUB2-8
    [18:12:23 371][HUB2-8][Inf]--Update device path
    [18:12:23 403][HUB2-3][Inf]--Device is removed
    [18:12:25 471][Global][Inf]--Catch DBT_DEVICEARRIVAL
    [18:12:25 471][Global][Inf]--Scan usb device
    [18:12:25 472][Global][Inf]--Aml scan WorldCup Device
    [18:12:25 473][Global][Inf]--Host: Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
    [18:12:25 473][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c26&subsys_f9201179&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:25 473][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&185fee1&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:25 473][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&2b4c469e&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:25 482][Global][Inf]---------->[Port0]Other device
    [18:12:25 482][Global][Inf]---------->[Port1]NoDeviceConnected
    [18:12:25 484][Global][Inf]---------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [18:12:25 484][Global][Inf]---------->[Port3]NoDeviceConnected
    [18:12:25 487][Global][Inf]---------->[Port4]Other device
    [18:12:25 489][Global][Inf]---------->[Port5]Other device
    [18:12:25 489][Global][Inf]---------->[Port6]NoDeviceConnected
    [18:12:25 489][Global][Inf]---------->[Port7]NoDeviceConnected
    [18:12:25 489][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:25 489][Global][Inf]--Host: Contrôleur d'hôte extensible Intel(R) USB 3.0
    [18:12:25 490][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c31&subsys_f9201179&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
    [18:12:25 490][Global][Inf]---->Roothub:IUSB3#ROOT_HUB30#4&1fe5f675&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    [18:12:25 490][Global][Inf]-------->[Port0]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port1]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port2]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port3]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port4]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port5]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port6]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port7]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port8]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port9]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port10]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port11]NoDeviceConnected
    [18:12:25 490][Global][Inf]-------->[Port12]NoDeviceConnected
    [18:12:25 490][Global][Inf]--Scan USB host controller complete
    [18:12:25 490][Global][Inf]--Update data center with HubMap
    [18:12:25 490][Global][Inf]--Update hub2 device data
    [18:12:25 490][Global][Inf]--Update HUB2-1
    [18:12:25 490][HUB2-1][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-2
    [18:12:25 490][HUB2-2][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
    [18:12:25 490][HUB2-3][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-4
    [18:12:25 490][HUB2-4][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-5
    [18:12:25 490][HUB2-5][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-6
    [18:12:25 490][HUB2-6][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-7
    [18:12:25 490][HUB2-7][Inf]--Update device path
    [18:12:25 490][Global][Inf]--Update HUB2-8
    [18:12:25 490][HUB2-8][Inf]--Update device path
    [18:12:25 503][HUB2-3][Inf]--Device is connected
    [18:12:25 503][HUB2-3][Inf]--Close device handle 0x000001a8
    [18:12:25 553][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&24a1ba1d&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000001a8
    [18:12:30 604][HUB2-3][Inf]--0-7-0-16
    [18:12:30 604][HUB2-3][Inf]--CheckFileRunState succeed
    [18:12:30 604][HUB2-3][Inf]-- low_power
    [18:12:30 609][HUB2-3][Inf]--Send command success
    [18:12:30 613][HUB2-3][Inf]--Read command status success
    [18:12:30 613][HUB2-3][Inf]-------------Download meson1.dtb-----------
    [18:12:30 614][HUB2-3][Inf]--0-7-0-16
    [18:12:30 614][HUB2-3][Inf]-- download mem dtb normal 141312
    [18:12:30 615][HUB2-3][Inf]--Send download command success
    [18:12:30 628][HUB2-3][Inf]--Read command status success
    [18:12:30 647][HUB2-3][Inf]--Transfer complete
    [18:12:30 647][HUB2-3][Inf]--Send download get_status command succeed
    [18:12:30 651][HUB2-3][Inf]--get_status success
    [18:12:31 151][HUB2-3][Inf]-------------ERASE FLASH-----------
    [18:12:31 151][HUB2-3][Inf]--disk_initial 1
    [18:12:31 151][HUB2-3][Inf]--Send command success
    [18:12:32 315][HUB2-3][Err]--failed:[18:12:32 315][HUB2-3][Err]--Check command return failed
    [18:12:32 405][HUB2-3][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
    [18:12:32 405][HUB2-3][Inf]--Close device handle 0x000001a8
    Log file:

Sign In or Register to comment.